Friction Material
For the most demanding applications we have the most advanced solutions.
Rigid
Available over a very wide range of organic formulas developed and tested 100% at Frenos Sauleda. We hold standard material for general purpose or specific material for critical applications, as low friction rate, high temperature resistance, high static friction, etc… Some of our materials are homologated for main OE manufactures.
Available in sheets and rings. Easy material for machining and bonding. It can be used for both wet and dry applications.
NAME | STATIC COEF. (U) | DYNAMIC COEF. (U) | T FADING (ºC) | WEAR RATE (mm3KWH) | COMPRESSIVE STRENGTH (MPa) | |
---|---|---|---|---|---|---|
FGR | 0.52±0.05 | 0.47±0.05 | >350 | 30 (at 150 ºC) | 160±5 | |
SA80/M | 0.60±0.05 | 0.50±0.05 | >340 | 60 (at 150 ºC) | 100±5 | |
SA80/10 | 0.46±0.05 | 0.48±0.05 | >350 | 25 (at 150 ºC) | 104±5 | |
SA80/20 | 0.42±0.05 | 0.35±0.05 | >350 | 25 (at 150 ºC) | 83±5 | |
SAFF | 0.55±0.05 | 0.60±0.05 | >350 | 25 (at 150 ºC) | 175±5 | |
SA80/05 | 0.60±0.05 | 0.57±0.05 | >350 | 80 (at 150 ºC) | 102±5 | |
FAG/M | 0.52±0.05 | 0.47±0.05 | >350 | 30 (at 150 ºC) | 160±5 | |
GHFM | 0.50±0.05 | 0.50±0.05 | >350 | 30 (at 150 ºC) | 190±5 | |
NT-DV | 0.59±0.05 | 0.50±0.05 | >350 | 25 (at 150 ºC) | 175±5 | |
HDS57 | 0.53±0.05 | 0.50±0.05 | >350 | 30 (at 150 ºC) | 120±5 | |
FAG/TW | 0.50±0.05 | 0.47±0.05 | >350 | 20 (at 150 ºC) | 170±5 | |
SA92 | 0.53±0.05 | 0.40±0.05 | >350 | 50 (at 150 ºC) | 150±5 | |
NR | 0.53±0.05 | 0.40±0.05 | >350 | 50 (at 150 ºC) | 150±5 | |
SFD | 0.50±0.05 | 0.40±0.05 | >310 | 60 (at 150 ºC) | 115±10 | |
SA80/25 | 0.35±0.05 | 0.28±0.05 | >250 | 15 (at 150 ºC) | 100±5 | |
SA18/04 | 0.50±0.05 | 0.50±0.05 | >400 | 60 (at 150 ºC) | 75±5 | |
DD01 | 0.50±0.05 | 0.45±0.05 | >350 | 35 (at 150 ºC) | 110±5 | |
SA65 | 0.60±0.05 | 0.65±0.05 | >350 | 45 (at 150 ºC) | 180±5 | |
AFV | 0.42±0.05 | 0.42±0.05 | >350 | 30 (at 150 ºC) | 140±5 | |
RWT | 0.43±0.05 | 0.60±0.05 | >400 | 100 (at 150ºC) | 185±5 | |
RWS | 0.45±0.05 | 0.65±0.05 | >400 | 70 (at 150 ºC) | 185±10 | |
MC3 | 0.65±0.05 | 0.62±0.05 | >400 | 40 (at 150 ºC) | 126±5 | |
CR-2M | 0.40±0.05 | 0.45±0.05 | >350 | 20 (at 150 ºC) | 126±5 | |
RP01 | 0.50±0.05 | 0.40±0.05 | >310 | 60 (at 150 ºC) | 110±5 | |
TOP/05 | 0.60±0.05 | 0.50±0.05 | >300 | 40 (at 150 ºC) | 143±5 |